New and Used Coffee Machines arriving every week!

Order online or call us : +1 323 592 3303

Toggle Nav
My Cart
Close
  • Menu
  • Setting

OptiPure QTi1 Water Treatment System

$285.00 USD 285
In stock
SKU
OP134

The OptiPure QTi1 is a single-cartridge water treatment system with a 15” Qwik-Twist

cartridge that reduces sediment down to 0.5 microns, and reduces chlorine, taste and odor at a flow rate of 2.25 gpm for 22,500 gallons. The system includes IsoNet®, OptiPure’s patented scale inhibiting technology, which delivers consistent protection against the precipitation and accumulation of scale and provides a protective barrier to help guard against corrosion.

 

System Benefits:

  • IsoNet® - OptiPure’s patented scale inhibiting technology helps protect equipment against scale and corrosion for the rated capacity of the system.
  • Reduces maintenance frequency and cost, and extends equipment life.
  • Gradient-density sediment filtration protects against dirt, rust and other debris down to 0.5 microns.
  • High-capacity activated-carbon filtration makes water taste great and protects equipment against corrosive chlorine.
  • Sturdy mounting bracket and full-flow inlet shut-off valve simplify installation.
  • Built-in pressure gauge allows visual monitoring of when filters need to be changed.
  • Inlet shut-off valve makes filter replacement quick and simple.
  • Utilizes Qwik-Twist cartridges that make changing filters quick, easy and sanitary.
  • NSF Certified

Installation:

  • Feed-water connection to system should be COLD only.
  • Do not exceed system specifications for temperature and pressure.
  • Allow 3” clearance below system for filter cartridge removal and cartridge replacement.
  • Connect filtered water line to ice or steam connections only. Do not use for condenser water.
  • Detailed installation, operation & maintenance manual included with each system.
  • No activation procedure or flushing required for system to perform as specified.

System:

  • Dimensions (Height x Width x Depth, inches) 21” x 6” x 4”
  • Connection - Inlet & Outlet 3/8” NFPT
  • Operating Pressure Range 10 - 125 psi (0.7 - 8.6 bar)
  • Inlet Water Temperature Range 35˚ - 100˚F (2˚ - 38˚C)

Performance:

  • Chlorine, Taste and Odor Reduction Capacity 22,500 gals. (85,162 liters)
  • Service Flow Rate 2.25 gpm (8.5 lpm)
  • Sediment Reduction 0.5 micron (nominal)
  • Scale & Corrosion Inhibitor IsoNet (100 grams

**Please note this system is only to be used with coffee and tea brewers and ice machines.  DO NOT USE with espresso or carbonated machines. **

Write Your Own Review
You're reviewing:OptiPure QTi1 Water Treatment System
Your Rating