New and Used Coffee Machines arriving every week!

Order online or call us : +1 323 592 3303

Toggle Nav
My Cart
  • Menu
  • Setting

Pressure Limiting Valve

In stock

Part description & Use

Connect ac female fitting on the adjustable water regulator directly to your water source's hose bib. Connect the female fitting on the water hose to the male fitting on the adjustable water regulator. Turn on the water supply in order to flush the water regulator and hose for one minute. Turn off the water supply. Connect the hose to your water inlet, then turn on the water supply. Turn on all fixtures to allow any air to be flushed out of the plumbing - this includes turning on showers, faucets, and flushing toilets. Adjust the regulator screw (found at the top of the cap on the regulator) until it is set to the desired pressure reading. Ensure that all fixtures have been turned off while making adjustments to the regulator screw until you reach the desired pressure reading.

Product features

  • Durable lead free brass, well under the NSF lead-free requirements of 0.12%.
  • Compatible with U.S. 3/4" water sources, NPT threads, simply assemble to connect with city water connector, protects filter and hose from damage.
  • Adjustable up to 160 PSI. Arrives with easy installation guide. Email us for an additional copy of the guide or quality control test.
  • Comes with Metal Brass Pipe fitting, Reducing Hex Nipple 3/8" - attachemnt for braided hose line.

Write Your Own Review
You're reviewing:Pressure Limiting Valve
Your Rating