Wilbur Curtis G4 GemX Gemini® Intellifresh 1.5 Single Satelite Brewer

Coffee Machine Depot USA: Your Trusted Authorized Distributor of Wilbur Curtis

Model: G4GEMXTIFT10A1000

Wilbur Curtis G4 GemX Gemini IntelliFresh® Single 1.5 Gallon Coffee Brewer with FreshTrac® Satellite

 Dispensers Included

 More than a coffee brewer. A true thinking machine. With it’s large 4.3-inch touchscreen and icon-driven interface that streamlines and simplifies operation, G4 GemX provides intuitive onscreen instructions for fast, streamlined training and real-time feedback on the brewing process. The unit also includes a USB port that lets operators easily transfer recipes from store to store.

GEMX INTELLIFRESH® BREWER FEATURES

• LED notification of freshness timing.
• Gold Cup Series™ – digital control module provides precise control over all aspects of brewing: time, temperature, volume plus specialty coffee needs from pre-infusion to pulse-brewing to water bypass.
• Preset, one-touch Global Recipes – Based on coffee type, grind and weight. Simplifies profile setting for gourmet results every time. Patented fast-wetting AFS spray head and non-immersed water temperature sensor.
• Encapsulated control board – Protects against steam, water and impact.
• Field selectable for 0.5, 1.0 or 1.5 gal. batch brewing.
• New highly-styled hot water faucet provides easy access to an unlimited supply of hot water for teas, soups, instants or other general need.

GEMX SATELLITE SERVER FEATURES

Easy Maintenance – Smart, water-tolerant design.

Intuitive FreshTrac LED System – Communicates freshness and volume at a distance — no distracting alarms.

Satellite Bottom Sloping Design – Allows full evacuation. Easy to empty and clean.

User Selectable LED Colors – Green, White, Yellow or Red. Select “fresh” color and a 2nd color for “Quality Expired.”

• COLOR 1 – Flashes During Brew Cycle
• COLOR 1 – Solid ON Indicates “Fresh”; programmable from 20 to 230 min.
• COLOR 2 – Flashes to indicate “Quality Expired”. Continuous for up to 18 hours.
• SOLID BLUE – Indicates volume after warmer is OFF; Warmer turns off automatically after 18 hours from start of brew cycle. No light indicates satellite is empty

DIMENSIONS

Height (in.) 31.9”

Width (in.) 18.2”

Depth (in.) 22.7”

ELECTRICAL

Phase 1/1

Volts 120/220

Amps 13.5/13.5

Heat Configuration 2x1600W

Wire 2W+G/3W+G

Watts 1650/2800

Hertz 50/60 

This is a dual voltage item that can be used in 120 or 220 Volts. Amperage and wire specifications need to match according to the voltage being used. If you have any questions, please contact a licensed electrician for clarification on what your facility requires. Refer to specifications above for clarification on the requirements.

WATER

Connector 3/4” Flare

Pressure 20-90 psi

Min. Flow Rate 1.0 GPM

Tank Volume 2.2 Gal

SHIPPING

Ship Height (in) 32.00”

Ship Width (in) 15.50”

Ship Depth (in.) 24.50”

Ship Weight: 51.00 lbs

Ship Cube: 7.00 cuft

 GENERAL

Certification: UL/ NSF

Warning: Proposition 65 Warning — Applies to the State of California Only.

 Installation Requirements

1. A secure surface capable of supporting the weight of the appliance.
2. For units without an attached cord set: Appropriately sized, UL listed, grounding type power cable to meet the electrical specifications for the appliance. If you have questions about the correct cable size and length, consult a qualified installer. If the unit will be hard wired to a junction box, the power cable must be long enough so that it can be moved for cleaning underneath.
3. A grounded electrical connection to an electrical circuit that meets the electrical specifications of the appliance (see SPECIFICATIONS). The circuit must be protected by the appropriate sized circuit breaker. If you are not certain that the existing circuit meets the requirements for your unit, consult a licensed electrician.
4. A water filtration system is required to maintain trouble-free operation.
5. Potable water supply line connection from the water filter capable of supplying the minimum flow rate required by the specifications. The water supply line must be able to connect to the flare fitting on the back of the unit. See the SPECIFICATIONS section for the correct size. The water line should also be capable of being controlled by a shut off valve. Do not connect the water line to a saddle or needle valve.