Wilbur Curtis ILGD-10 Twin Coffee Grinder

Coffee Machine Depot USA: Your Trusted Authorized Distributor of Wilbur Curtis

Model: ILGD-10

Wilbur Curtis Twin Coffee Grinder with Digital InterLock

Introducing the first coffee grinders of the 21st century from Curtis, the leading name in coffee brewing, featuring ADSTM (Advanced Digital System) technology. These innovative coffee grinders allow users to seamlessly link the grinder to the brewer, ensuring the perfect brew every time. Specifically designed for use with Gemini® and ThermoProTM Series brewers with the 3-Batch option, these advanced grinders interlock effortlessly with complimentary systems, simplifying fresh grind/fresh brew programs. With Dual Hopper capacity, enjoy the flexibility to fresh grind from two separate selections, ensuring your specialty or decaf coffee is as fresh as your house blend.

Key Features:

• Fully Automatic Operation
• Solid State, Dual Range Timers for Precise Portion Control
• Models Ilg & Islg Interlock With Gemini Systems for Foolproof Fresh-Grind/Fresh-Brew Coffee Center
• Infinitely Adjustable Grind Settings for Customization
• Fully Adjustable Portion Size: 1 Oz. to 27 Oz. (20 Oz. on Ilg and Islg)
• Larger Hopper Capacity Than Competitive Models, Reducing Labor Costs
• Full-Size Models: Shg with Single 6 Lb. Hopper, Dhg/Ilg with Dual 7.5 Lb. Each Hopper
• Low-Profile Models: Slg with Single 5 Lb. Hopper, Islg with Single 5 Lb. Hopper

Dimensions:

• Height: 29.500 inches
• Width: 10.000 inches
• Depth: 14.500 inches

Electrical Specifications:

• Phase: 1
• Volts: 120
• Amps: 8.0
• Wire: 2W+G
• Watts: 960
• Hertz: 60

Shipping Details:

• Ship Height: 34.00 inches
• Ship Width: 15.00 inches
• Ship Depth: 20.00 inches
• Ship Weight: 62.00 lbs
• Ship Cube: 5.90 cuft

General Information:

• Certification: UL

Upgrade your coffee brewing experience with the Digital InterLock Series Coffee Grinders by Curtis, ensuring precision, freshness, and convenience in every cup.

Warning: Proposition 65 Warning — Applies to the State of California Only.

Installation Requirements

1. A secure surface capable of supporting the weight of the appliance.
2. For units without an attached cord set: Appropriately sized, UL listed, grounding type power cable to meet the electrical specifications for the appliance. If you have questions about the correct cable size and length, consult a qualified installer. If the unit will be hard wired to a junction box, the power cable must be long enough so that it can be moved for cleaning underneath.
3. A grounded electrical connection to an electrical circuit that meets the electrical specifications of the appliance (see SPECIFICATIONS). The circuit must be protected by the appropriate sized circuit breaker. If you are not certain that the existing circuit meets the requirements for your unit, consult a licensed electrician.
4. A water filtration system is required to maintain trouble-free operation.
5. Potable water supply line connection from the water filter capable of supplying the minimum flow rate required by the specifications. The water supply line must be able to connect to the flare fitting on the back of the unit. See the SPECIFICATIONS section for the correct size. The water line should also be capable of being controlled by a shut off valve. Do not connect the water line to a saddle or needle valve.

Warning: Proposition 65 Warning — Applies to the State of California Only.