Pentair SX22RK Replacement Cartridge
SKU
SKU:6817
Couldn't load pickup availability
About the Product
Pentair SX22RK Replacement Cartridges Now Available at Coffee Machine Depot USA
Coffee Machine Depot USA, an authorized distributor, is thrilled to announce the availability of the Pentair SX22RK Replacement Cartridges. These cartridges serve as the perfect replacement for the SX2-22 Filtration System, a sophisticated dual-housing water treatment solution. The SX2-22 system is engineered to reduce sediment to 0.5-microns and minimize chlorine, taste, and odor at a service flow rate of 3.0 gallons per minute (gpm) for up to 30,000 gallons. It incorporates ScaleX2®, an innovative scale inhibition technology that prevents calcium-carbonate scale formation without the use of chemicals.
System Advantages
- ScaleX2® Technology: Guards boilers, steam generators, and coffee making equipment against scale build-up, reducing maintenance costs and prolonging the lifespan of your appliances.
- Advanced Filtration: Gradient-density sediment filtration captures dirt, rust, and debris down to 0.5-microns, while high-capacity activated-carbon filtration enhances water taste and shields equipment from chlorine damage.
- Easy Installation and Maintenance: Comes with a durable, powder-coated mounting bracket, full-flow inlet shut-off valve, and built-in pressure gauge for straightforward installation and filter monitoring. Quick and simple filter replacement is ensured by inlet shut-off and depressurization valves.
Applications
Ideal for:
- STEAM & COMBI OVENS: Suitable for boilers or steam generators up to 3.0 gpm. Not suitable for flash type combi ovens.
- COFFEE BREWERS: Optimized for use up to 3.0 gpm.
Installation Recommendations
- Only connect to cold water.
- Follow system specifications for temperature and pressure to avoid exceeding them.
- Ensure a 3” clearance below the system for easy cartridge replacement.
- Designed exclusively for ice-and-steam production connections; not for condenser water.
Cartridge Specifications
CTO-20 Cartridge:
|
Dimensions (Height x Width X Depth, Inches) |
20”h x 2.8”w x 2.8”d |
|
Operating Pressure Range |
10 - 125 psi (0.7 - 8.6 bar) |
|
Inlet Water Temperature Range |
35˚ - 100˚F (2˚ - 38˚C) |
|
Chlorine, Taste and Odor Reduction Capacity |
30,000 gals. (13,550 L) |
|
Service Flow Rate |
3.0 gpm (11.3 lpm) |
|
Sediment Reduction |
5 microns (nominal) |
|
Scale & Corrosion Inhibitor |
N/A |
SCLX2-2 Cartridge:
|
Dimensions (Height x Width X Depth, Inches) |
20” h x 2.9” w x 2.9” d |
|
Operating Pressure Range |
10 - 125 psi (0.7 – 8.6 bar) |
|
Inlet Water Temperature Range |
35˚ - 100˚F (2˚ - 38˚C) |
|
Chlorine, Taste and Odor Reduction Capacity |
N/A |
|
Service Flow Rate |
2.5 gpm (9.5 Ipm) |
|
Sediment Reduction |
N/A |
|
Scale & Corrosion Inhibitor |
ScaleX2® |
System(s) Cartridge Used In
|
Model |
Part Number |
QTY |
|
160-50142 |
1 |
Cartridge Replacement Guidance
- Pre/post-filters and mineral addition cartridges should be replaced every 6 months or as needed based on water pressure and flow.
- Membrane lifespan varies; typically, 12-18 months but can extend up to 3-5 years depending on conditions.
Important: This product is intended for commercial use and should be installed and maintained following the manufacturer’s instructions. It should not be used with water of uncertain quality without adequate disinfection pre or post-treatment.
Coffee Machine Depot USA takes pride in offering this essential component to ensure your water treatment systems operate efficiently and effectively.
Warning: Proposition 65 Warning — Applies to the State of California Only. LEARN MORE >
